Multitool Belt & Disc Grinding Attachment 915 x 50mm

PO362 | Multitool Belt & Disc Grinding Attachment Attachment for TM400-200 Bench Grinder 8in (200mm) Features The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing. • EFFICIENCY - Superior performance and a user friendly belt change of under 5 seconds. • VERSATILITY - Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between. • ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners. • QUALITY CONSTRUCTION - Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating. • 3 YEAR WARRANTY - Against faulty materials and workmanship, even when used commercially. Specifications • 36in x 2in (915 x 50mm) Belt (100 Grit) • 7in (178mm) Diameter Disc (120 Grit) • 3-1/2in (89mm) Diameter Rubber Contact Wheel • 5-1/2in (140mm) Diameter Drive Wheel • Suits most popular 6in or 8in Bench Grinders with a screw mounted wheel guard and a minimum of 1/3 HP • Suits grinder shaft sizes of 5/8in and 1/2in. A steel bush is supplied to adapt the drive wheel to 1/2in • Fitting Kit supplied. mounted wheel guard and a minimum of 1/3 HP • Suits grinder shaft sizes of 5/8in and 1/2in. A steel bush is supplied to adapt the drive wheel to 1/2in • Fitting Kit supplied.